Want to know some more useful tips to get the best quality audio for your podcast? Use these 15 microphone techniques to improve your show's audio quality.
1. Microphone Processor
A microphone processor can help to amplify your voice and make it more clear. This can make a difference in the sound of your voice and you can adjust your voice to sound exactly how you'd like it to sound. A great idea for those who aren't that confident in how their voice sounds on recordings.
2. Color Coordinate
When you set up your podcast studio, you are likely to have a lot of cables. This can be extremely confusing so we recommend a color to coordinate your cables so you can keep track of where you go. You can also use cable ties or other types of cable organization to keep everything neat and tidy.
3. Condenser or Dynamic?
Two main points here:
Condenser microphones are for close-up audio, like spoken word, so they will be suitable for most podcasts due to their close range and sensitivity.
Dynamic microphones are perfect for making sounds that are even farther away due to their ability to absorb less bleeding and focus away from the noise.
If you have poor quality cables, they can also spoil the excellent microphone audio recording. Here are some things to keep in mind when looking for a good quality cable:
Some good brands to go to for good quality cables are Lynx Pro, Stagg, and Mogami.
5. Upright or Upside Down?
There are two common positions for a microphone; With a microphone vein at the top or at the top, Upside down. In the end, it all comes down to personal preference, but one thing to note is that the heat increases over a long period of time causing damage to the diaphragm and when it is upright.
6. 2 Microphones are Better Than 1
If you can manage, it always helps to have two mics. With two microphones, if you are recording solo, you'll have a backup microphone if something goes wrong with you, and if you're recording and you have a guest, they might have their microphone instead of sharing it with you.
7. Label Your Microphone
When you first get your microphone, you need to set it up to record audio. You can adjust some of the dials or switches to get the perfect level or settings for recording. It always helps to create labels with those settings and then attach them to your microphone for quick reference.
8. Not Too Loud!
Microphones are designed for normal volume levels, be it music or vocal. You don't want to raise your voice. If the volume level appears low, try adjusting the lens for your microphone or check the headphone volume level. If you are too loud, you will damage the diaphragm of your microphone. you can also check your headphones with an online mic test that allows you to check if the microphone is working properly
9. When Not in Use, Turn it OFF
Microphones can heat up a lot when they are left on which can cause permanent damage. The diaphragm in the microphone can be damaged and this can distort the sound in your recordings. Not to mention how much power you are wasting in keeping the microphone live when not in use! When you are not using your microphone, make sure you turn it off and it will be fine.
10. Don't Blow Into The Mic
If you blow into the mic, you will cause peaking and some nasty sounding audio. Microphones are designed to pick up sound waves, not the wind. This and tapping or blowing on your microphone can cause permanent damage to your microphone. If you need to test the volume level, try clapping or talking instead.
11. Aim Your Microphone
Your microphone may make a lot of popping noise with too much or too little purpose. Make sure you aim your microphone accurately, speak into your microphone capture range, and place yourself in the middle in front of the microphone as we said before. There is also the idea of keeping your microphone in position so that it hangs down from above instead of coming out of your mouth. This is because when you speak, you often put the air down, so if the mic is down, it will not lift the air so that your audio will peak.
12. No Reflective Surfaces
Tabletops, mirrors, and Windows microphones reflect the sound that is sounding echoes on your recordings. You can avoid this by recording your audio somewhere without any of these things, or you can do small things like soft furniture by pulling the curtains on the windows. Some people are limited to putting blankets on their walls, securing a pillow in the corner of the room, or even just recording under the blanket! (Be careful with that option! Make sure your blanket doesn't wear a microphone.)
13. Pop Filter
It is important to get a pop filter as this can stop popping sounds like P's and T's, reducing the risk of peaking. Since most pop filters are easy to clean, they act as an additional barrier, preventing anything from landing on a handy microphone. It can also prevent you from getting too close to the microphone. Pop filters also come in a few different styles. There’s the usual windshield that people are used to seeing, and then there’s also the echoes, such as from left to right, which is fully adjusted.
14. Speak Directly into Your Mic
Will you move away from the person you are trying to talk to? Well, it's far from the microphone or even on the side of the microphone. This will reduce the volume of your audio and make it sound like you are not in the same room as the mic. Make sure you are facing your microphone and ideally it should be at head level. This will help you get consistent volume in all your recordings and make you very clear.
Do not go too close or too far away from the microphone. Is too close and you run the risk of blowing out the microphone and peaking; It's too far away and you're making a noise like a well collapsing. Try spreading your left hand and place your thumb on the mic, then your little finger over your mouth. This is a good measure of how far you should be from the mic.
There are so many tips on the internet about different techniques of microphones that you got lost, that's why we have created this guide to improve the sound quality of your show. We hope you find this short guide useful.
Please sign in to leave a comment.